Statoil to drill the world’s first automated exploration well on a floating rig This summer Sekal and MHWhirt’s advanced automated drilling control (ADC) solution is put to the test by Statoil on Songa Enabler. This summer Sekal and MHWhirt’s advanced automated...
ONS Technical Session presentation by Sveinung Lofthus, CEO Sekal, DrillTronics - drilling automation, experiences from the North Sea, Tuesday 30 August, Technical Session No.6 - New downhole technologies (13:00 - 15:00) in Hall 6. You can find Sekal on the Saudi...
A new collaboration and development agreement between Sekal and Kongsberg Digital will integrate DrillScene® advanced monitoring and trend analysis functionality with SiteCom® real-time data aggregation and visualization solution, including SiteCom Well Advisor. Under...
Sekal in the press
The service companies fight to provide the most cost effective solutions. With excellent results from Statfjord C, Sekal is now ready to roll out DrillTronics to the masses. – Even in a...
Teknisk Ukeblad March 2015: New system offers significant savings: Drilling wells with ‘autopilot’ Drilling processes in the North Sea are supported from Sandnes. In October 2014, the...
Bergerud R. , Presentation at Norwegian Petroleum Association (NPF) The 26. Kristiansand conference drilling & wells technology, September 2016.
SPE 168018-MS, Chmela, B.; Gibson, N.; Abrahamsen, E. and Bergerud, R. Presented at the IADC/SPE Drilling Conference and Exhibition in Fort Worth, Texas, USA, 4–6 March 2014.
F.P Iversen, SPE, B. Daireaux, SPE, A. Leulseged, R.G. Mihai, SPE, and L.J. Gressgaard, Intl Research Inst of Stavanger; R. Bergerud, SPE, Sekal; and B.T. Bruun, SPE, and M.K. Balov, SPE, Statoil ASA, April 2013
SPE-177825-MS Egill Abrahamsen, Ronny Bergerud, Sekal AS, Roald Kluge, Matthew King, Statoil ASA, 12 November 2015
Thorogood, J., Aldred, W., Florence, F., and Iversen, F. 2010.” SPE Drill & Compl 25 (4): 419-425. SPE-119884-PA. doi: 10.2118/119884-PA.
Iversen F.P., E. Cayeux, E. W. Dvergsnes, 2008: Paper IADC/SPE 112744 presented at IADC/SPE Drilling Conference in Orlando, Florida, 2008
Gravdal J.E., R. J. Lorentzen, K. K. Fjelde, E. H. Vefring, 2005: Paper SPE 97028 presented at the SPE Annual Technical Conference and Exhibition, Dallas, Texas, 9-12 October 2005
IADC/SPE 150942. Eric Cayeux, Benoît Daireaux, Erik Wolden Dvergsnes, IRIS, Gunnstein Sælevik, Sekal, Mohamed Zidan, Statoil. This paper was prepared for presentation at the 2012 IADC/SPE Drilling Conference and Exhibition held in San Diego, California, USA, 6–8 March 2012.
SPE 150422. Eric Cayeux, Benoît Daireaux, Erik Wolden Dvergsnes, IRIS, Gunnstein Sælevik, Sekal. This paper was prepared for presentation at the SPE Intelligent Energy International held in Utrecht, The Netherlands, 27–29 March 2012.
Cayeux, E., Daireaux, B., and Dvergsnes, E.W. 2011. SPE Drill& Compl 26 (1): 41-51. SPE-128285-PA. doi: 10.2118/128285-PA.
Cayeux E., B. Daireaux, E. W. Dvergsnes, 2010, Paper SPE/IADC 128286 presented at the SPE/IADC Drilling Conference and Exhibition, New Orleans, Louisiana, 2-4 February 2010
F. Iversen, International Research Institute of Stavanger (IRIS); E. Cayeux, IRIS; E. W. Dvergsnes, IRIS; M. Welmer,
National Oilwell Varco (NOV); A. Torsvoll, Statoil and A. Merlo, ENI S.p.A. E&P Division
2007 AADE technical paper AADE-07-NTCE-4
Larsen H.F., T. E. Alfsen, R. Kvalsund, F. P. Iversen, M. Welmer, S. Ekrene, J. Lundal, 2010: Paper SPE/IADC 128234 presented at the SPE/IADC Drilling Conference and Exhibition, New Orleans, Louisiana, 2-4 February 2010
Paper SPE/IADC 128958 presented at the SPE/IADC Drilling Conference and Exhibition, New Orleans, Louisiana, 2-4 February 2010
Iversen F., Cayeux E., Dvergsnes E.W., Ervik R., Welmer M. and Balov M.K., 2009, Paper SPE 112744, SPE Drilling and Completion, November 2009
Cayeux E., Daireaux B., 2009: Paper SPE/IADC 119435 presented at the SPE/IADC Drilling Conference and Exhibition, Amsterdam, The Netherlands, 17-19 March, 2009
Cayeux E., Dvergsnes E.W. and Iversen F., 2009,Paper SPE/IADC 119650 presented at the SPE/IADC Drilling Conference and Exhibition, Amsterdam, Netherlands, 17-19 March 2009
Iversen F., Cayeux E., Dvergsnes E. W., Gravdal J. E., Vefring E. H., 2006: Paper IADC/SPE 99207 presented at the IADC/SPE Drilling Conference, February 21–23, 2006, Miami, Florida, U.S.A.
DrillScene® and DrillTronics training and support
Sekal offers a range of DrillScene training courses to meet the needs of data analysts, drilling analysts, and mud loggers. Each course teaches effective workflow practices and encourages users to adopt the most effective and proactive processes for their operations.
Sekal provides round-the-clock support for its software products through a dedicated hotline and an online support facility that includes password-protected access to a comprehensive user guide
The Sekal support hotline
Phone: +47 476 33 444
>> Do you have a question for support?
|Interpretation & Monitoring||Advanced||Data analysts, drilling engineers, and mud loggers|
|Configuration and setup||Introduction||Data analysts, drilling analysts, and mud logger|
|IT Setup and Configure||Advanced||IT administrators, IT application support staff|
|Interpretation & Monitoring||Introduction||Data analysts, drilling engineer, and mud loggers|
|Interpretation & Monitoring||Advanced||Data analysts, drilling engineer, and mud loggers|
|Interpretation & Monitoring||Advanced||Data analysts|
|Interpretation & Monitoring||Super-user||Expert users|
|Interpretation & Monitoring||Advanced||Driller|
|Maintenance and support of DrillTronics||Advanced||Electricians|
Drill with Confidence
We focus on helping clients enhance their operations and optimize drilling performance by applying trend analysis and dynamic modeling to predict changes in drilling conditions that will lead to delays, inefficiencies and invisible lost time.